Command Sequence to Generate file(s):Standard Save - In TEXT format

NOTE: Please make sure that the drawing extents are reasonable for your target system prior to export. If you have a 5" x 5" design on a page sixe of 25" x 25" and the lower left of the board is at 18" x 18" you will likely have problems with your translation. Please move the design origin to the lower left of the actual board outline prior to saving the design for translation.

Command Sequence to Generate file(s) in Protel V3.0 and up, which is also known as PROTEL 98/99:

Export-> Save as FileType PROTEL PCB 2.8 ASCII (*.PCB)